Operation
AC Current Measurements
*NOTE:
Ensure that the test leads are disconnected from the meter before
making current clamp measurements.*
1.
Set the Function switch to the
400A
range. If the approximate range of
the measurement is not known, select the highest range then move to
lower ranges if necessary.
2.
Press the
REL
button to zero the meter display.
3.
Use rotary function switch to select
40A AC
or
400A AC
range.
4.
Select AC current Test, press the
INRUSH/PEAK
Button to turn Inrush
current test, the LCD will display “----”.
5.
Press the trigger to open jaw, Fully, enclose only one conductor, For
optimum results, center the conductor in the jaw.
6.
The clamp meter LCD will display the reading.
