Function Buttons
MODE and VFD Button
•
Short Press the
MODE/VFD
Button to toggle between modes available for the
rotary switch position (V/Hz/%)
•
Long Press and Hold the
MODE/VFD
while
POWERING ON
will disable the
Auto Power OFF (APO) Function
•
Long Press and hold
MODE/VFD
will engage VFD measuring mode.
HOLD and Flashlight Button
•
To freeze the LCD reading, press the
Hold/Flashlight
Button.
•
While data hold is active, the
“H”
icon appears on the LCD.
•
Press the
Hold/Flashlight
Button again to return to normal operation.
•
The LCD is equipped with backlighting for easier viewing, especially in dimly lit
areas.
•
Press the
Hold/Flashlight
Button to turn the Flashlight on, Press again to turn
the Flashlight off.
Range Button
•
Press the
RANGE
Button to activate the manual mode and to disable the
Autorange function, The symbol
“AUTO”
disappears from the upper left part
of the display.
•
In manual mode, press the
RANGE
Button to change measuring range, the
relevant decimal point will change its position.
•
The
RANGE
Button is not active in positions , ,CAP,Hz%,Temp °C °F .
•
In Autorange mode, the instrument selects the most appropriate ratio for
carrying out measurement.
•
• If a reading is higher than the maximum measurable value, the indication
“O.L”
appears on the display.
•
Press and hold the
RANGE
Button for more than 1 second to exit the manual
mode and restore the Autorange mode.
PEAK/ INRUSH Button
