TrinityHighway.com
30
Created November 2021
STEP 13
SRT™ Angle Strut Assembly
PARTS
INSTRUCTIONS
K
33875G
1 EA
1. Assemble the SRT™ Angle Strut (Part K) as shown above on the non-
traffic side.
2. In a relatively flat grade installation a portion of the SRT™ Angle Strut
will be slightly below grade, the installer must provide a shallow
valley/trough for installation of the strut between Post 1 and 2.
3. Use the SYTP
®
hole in Post #2 that best aligns with the SRT™ Angle Strut.
4. Tighten all threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
X
3391G
2 EA
AA
3300G
4 EA
BB
3340G
2 EA
Use only Trinity Highway parts
that are specified herein for the
SRT™ 31 System for assembling,
maintaining, or repairing the
SRT™ 31 System. Do not utilize
or otherwise commingle parts
from other systems even if those
systems are Trinity Highway
systems.
WARNINGS
Ensure the SRT™ Angle Strut is properly attached to the CR Post
1 Bottom and SYTP
®
on the non- traffic side.
