TrinityHighway.com
19
Created November 2021
STEP 3
CR Post 1 Bottom Assembly
PARTS
INSTRUCTIONS
D
34052A 1 EA
1. Assemble the CR Post 1 Bottom (Part D) in the configuration and
orientation as shown above.
2. Ensure the CR Post 1 Bottom is installed approximately plumb and
oriented with the hole being closest to the upstream end of the CR Post 1
Bottom.
3. Ensure the top of the CR Post 1 Bottom does not exceed 4” [100 mm] above
finished grade.
Use only Trinity Highway parts that
are specified herein for the SRT™
31
System
for
assembling,
maintaining, or repairing the SRT™
31 System. Do not utilize or
otherwise commingle parts from
other systems even if those
systems are Trinity Highway
systems.
WARNINGS
Ensure proper site grading in accordance with state/specifying
agency guidelines or the AASHTO Roadside Design Guide,
whichever is more stringent. Ensure the CR Post 1 Bottom is
oriented correctly and the height does not exceed 4” [100 mm]
above finished grade. Failure to follow this warning could result in
serious injury or death in the event of a vehicle impact with the
system
