44
Display CO2 signal light
The "Display CO2 signal light" parameter can be used to set which data
of the connected CO2 sensors the CO2 display of the touch panel should
refer to.
Note:
The CO2 sensors are currently not included as standard with the Live-
Link LightGrid system. If you have any questions regarding the integra-
tion and use of these sensors, please contact the LMS Light Manage-
ment Support of Trilux ([email protected]).
The following options are available:
Setting options
OFF
CO2 display on the touch panel
is disabled
All sensors group 1
CO2 display on the touch panel
refers to the mean value of all
sensors from group 1
All sensors group 2
CO2 display on the touch panel
refers to the mean value of all
sensors from group 2
All sensors group 3
CO2 display on the touch panel
refers to the mean value of all
sensors from group 3
...
All sensors group 32
CO2 display on the touch panel
refers to the mean value of all
sensors from group 1
All sensors in the room
CO2 display on the touch panel
refers to the mean value of all
sensors from the room
Network settings – added devices
Once a device has been selected and set up, it is added to the active
network. Successful adding to the network is indicated by the tick to the
right of the device name.
COMMISSIONING
Содержание LiveLink LightGrid
Страница 1: ...LIVELINK LIGHTGRID...