Trilux LiveLink LightGrid, Инструкция по эксплуатации

Страница: 40 / 51

40
Swarm MDT (motion detector) switch-off delay
With the "Swarm MDT (motion detector) switch-off delay" parameter,
you can set how long the lighting should remain switched on in the ab-
sence of movement. The following options are available:
Setting options
1 minute Switch-off after 1 minute
2 minutes Switch-off after 2 minutes
3 minutes Switch-off after 3 minutes
4 minutes Switch-off after 4 minutes
5 minutes Switch-off after 5 minutes
10 minutes Switch-off after 10 minutes
15 minutes Switch-off after 15 minutes
20 minutes Switch-off after 20 minutes
25 minutes Switch-off after 25 minutes
30 minutes Switch-off after 30 minutes
40 minutes Switch-off after 40 minutes
50 minutes Switch-off after 50 minutes
1 hour Switch-off after 1 hour
2 hours Switch-off after 2 hours
3 hours Switch-off after 3 hours
4 hours Switch-off after 4 hours
COMMISSIONING
Setting options
absolute, according to time Absolute curve calculation
according to the time
relative, according to position of
the sun
Relative curve calculation ac-
cording to the position of the sun
Swarm HCL-curve calculation
The "Swarm HCL-curve calculation" parameter can be used to set how
the HCL-curve is calculated for the swarm. The following options are
available:
Setting options
OFF Motion sensor disabled
ON room (only luminaires in the
vicinity)
Swarm mode activated: all
luminaires in the room that are
within the reception range of the
luminaire are actuated.
ON group (only luminaires in the
vicinity)
Swarm mode activated: all
luminaires in the group that are
within the reception range of the
luminaire are actuated.
ON complete room (all lumi-
naires)
Swarm mode activated: all lumi-
naires in the room are actuated.
ON complete group (all lumi-
naires)
Swarm mode activated: all lumi-
naires in the group are actuated.
Swarm mode
With the "Swarm mode" parameter, the functional range of the swarm
mode can be defined. The following options are available: