30
Setting options
do not use
The light detector is disabled
used
The light detector is enabled
Light detector
The "Light detector" parameter enables the light sensor for daylight
control. The following options are available:
230V push-button 1
With the "230V push-button 1" parameter, a function can be assigned
to the push-button input T1 on the controller. The following is a default
option:
Setting options
Short: AUTO <-> OFF /
Long: bright <-> dark
Short button press:
Switch automatic mode on or off
Long button press:
Touchdimm
Note:
Further setting options for the "230V push-button 1" parameter are
listed in a table in the appendix.
COMMISSIONING
230V push-button 2
With the "230V push-button 2" parameter, a function can be assigned
to the push-button input T2 on the controller. The following option is a
default option:
Setting options
Short: AUTO <-> OFF /
Long: warm <-> cool
Short button press:
Switch automatic mode on or off
Long button press:
Colour Touch Dim
Note:
Further setting options for the "230V push-button 2" parameter are
listed in a table in the appendix.
Содержание LiveLink LightGrid
Страница 1: ...LIVELINK LIGHTGRID...