Trilogy Mentor XL, Руководство пользователя

Страница: 21 / 84

Mentor XL
3.9.5 Setup
The System Setup menu provides control of the basic configuration of the Mentor XL, and will be
used primarily during the installation phase. These include:
•
Configuration of the LTC option (when available).
•
Configuration of the Clock Output.
•
Comprehensive control of General Purpose Inputs and Outputs, including
o
the input signal response mode
o
the action resulting from a GPI trigger
o
the event causing a GPO state change
•
Check and control the internal memory
• Setup of the real time clock (RTC)
•
Configuration of the Network Time (NTP) option (when available)
•
Via the Comms menu:
o
configuration of the Ethernet port
o configuration of the serial port
•
Via the Display menu:
o
enable and control timing of the menu timeout
o
set the display contrast
•
Configuration the Mentor as “slave”, allowing settings to be retrieved from a “Master”.
•
Upgrade the Mentor XL, including the addition of features and test patterns.
See section 8 for more details.
3.9.6 Status
The Status menu provides, for information only, the current version numbers of the hardware and
software of the Mentor XL. These values will be required when speaking to Trilogy Technical
Support.
In addition, a series of status error messages may be enabled for display on the LCD screen. The final
option on this menu displays a summary of the current configuration status. See section 9 for more
details.
3.9.7 Options
The Options menu shows the type of board fitted in each of the three option slots. If no board is
currently fitted, the text “OPTION” will be displayed. The text “TLS” refers to the tri-level sync option
board. Note that the Options branch is only displayed if hardware option modules have been
installed.
Page 21 of 84 Trilogy Communications