Trilogy Communications Mentor RG 360-00-05 Скачать руководство пользователя страница 86

Страница: 86 / 121

Page 86 of 121

Trilogy Communications

Mentor RG

13.7.2

DVITC mode

The factory default mode for DVITC is “Off”. DVITC is only available with standard definition SDI

outputs.

13.7.3

ATC sub-menu

The factory default mode for ATC is “Off”. ATC is available with both standard and high definition SDI

outputs.

•

ATC Coding

•

ATC Line

: were the ATC data to be re-encoded as a VITC signal, it would appear on the line

number defined here. Default is line 10.

13.7.4

On-screen timecode

The following SDI outputs are capable of displaying on-screen timecode:

•

Main unit

•

360-20-00 HD/3G SDI Expansion module

Once enabled, the on-screen timecode position may be set to each of the four corners of the screen

(top left, top right, bottom left or bottom right) using the “Position” menu. The hardware revision of

any fitted expansion modules may be checked from the Status menu: see section 9.2.4 for details.

Содержание Mentor RG 360-00-05


























































































































Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы:

Trilogy Communications Mentor RG 360-00-05, Руководство пользователя, Страница: 86 / 121

Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы: