Trilogy Communications Mentor RG 360-00-05 Скачать руководство пользователя страница 101

Страница: 101 / 121

Page 101 of 121

Trilogy Communications

Mentor RG

16.

SOFTWARE FEATURES: NTP AND SNMP

16.1

360-18-02

NTP

ETWORK

IME

ROTOCOL

)

UPPORT

This is an optional software only feature: please contact your usual Trilogy sales representative for

details.

•

If enabled, the menu will offer “Server”, “Client” and “Disabled”: client and server are mutually

exclusive.

•

When acting as a client, Mentor RG can sync to any Internet NTP server.

•

When acting as a server the Mentor RG should, ideally, be fitted with a GPS board but this is not

essential. Even if the server is free running, a client can still sync to Mentor RG.

The Vector settings appear on the Setup >> Misc web page. Server address and Server Timeout are

only available while Client mode is selected.

Front Panel Menu

Setup

NTP

Mode

Server Mode

Client Mode

Disabled

†Server Address

†Server Timeout

<0 - 9999 sec>

Note: Fields to set server address and server timeout are only displayed in “Client” mode.

Содержание Mentor RG 360-00-05


























































































































Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы:

Trilogy Communications Mentor RG 360-00-05, Руководство пользователя, Страница: 101 / 121

Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы: