Trilogy Communications Mentor RG 360-00-05 Скачать руководство пользователя страница 22

Страница: 22 / 121

Page 22 of 121

Trilogy Communications

Mentor RG

The content and features of each branch are explained in later sections of this manual and may be

found by following the links below.

Section 4-- Help -- page 23

Section 5 -- SDI: Digital Video -- page 25

Section 6 – AV: Analogue Video -- page 37

Section 7 – Audio -- page 52

Section 8 -- Lock – page 56

Section 9 -- Setup – page 59

Section 10 – Status -- page 63

Section 11 – Admin – page 70

Section 12– Options and Features -- page 73

Note that the Options branch is only displayed if hardware option modules have been installed.

3.11

PDATING

ENTOR

From time to time, new code may be released for the Mentor RG. This falls into one of three

categories:

•

Software

•

Changes to test patterns

•

Changes to menu structure

This is most easily carried out from the admin web pages of Vector; please see section 11.6 for

details. Please contact your supplier or Trilogy Technical Support for more information.

Содержание Mentor RG 360-00-05


























































































































Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы:

Trilogy Communications Mentor RG 360-00-05, Руководство пользователя, Страница: 22 / 121

Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы: