Trilogy Communications Mentor RG 360-00-05 Скачать руководство пользователя страница 57

Страница: 57 / 121

Page 57 of 121

Trilogy Communications

Mentor RG

8.1.1

Genlock - Mode

Select the mode required using the encoder control. Please be aware that the mode will change

immediately each option is selected.

•

Internal Free Run

: sets the unit to be free running, relying on the internal oven oscillator for

stability. The ScH. of the unit will be set to zero.

Note:

the Mentor RG

must

be set to free run

when locking to a GPS signal.

•

External 10MHz

: sets the unit to genlock to the 10MHz input. There will be no fixed phase

relationship with any other units locked to this signal. The ScH. of the unit will be set to zero.

•

Manual SC Phasing

: sets the unit to genlock to the video input. The subcarrier phase offset

may be adjusted as required.

•

Force Strict ScH

: sets the unit to genlock to the video input. The ScH. of the outputs of the

unit is forced to be zero regardless of the genlock input ScH. This is achieved by moving the

line timing with respect to the genlock input until the correct ScH. phase results.

•

Follow External SC Phase

: sets the unit to genlock to the video input. The subcarrier output

phase is set to be the same as the input genlock video.

•

Sync Lock Only

: sets the unit to genlock to the video input. The system is genlocked using

only the sync information of the genlock video input. The ScH. phase of the output is forced

to be zero - i.e. “correct”.

8.1.2

Genlock - Loss

Set the operational mode of the unit following loss of the genlock signal.

•

Revert to Internal

: If the external reference input is removed, the unit will use the internal

oven maintained oscillator or GPS signal (when available) as its master oscillator.

•

External 10 MHz

: If the genlock video input is removed, the unit will use the 10 MHz input as

its master oscillator. If the 10 MHz input is not present when the video input fails, the unit

will use the internal oven maintained oscillator or GPS signal (when available) as its master

oscillator.

•

Flywheel

: If the genlock video input is removed, the unit will continue to operate -

“flywheel” - at the same frequency as the genlock input just removed. Note that if the unit is

powered up in this mode with no genlock input applied, the Mentor RG timing may not be

within specification.

8.1.3

Genlock – Field Lock

Select the mode required using the encoder control or left – right keys.

•

Crash

: Sets the unit to lock near instantaneously to the field information of an applied

genlock video input. This is the normal mode of operation.

•

Line Drop

: Sets the unit to lock to the field information of an applied genlock video input by

moving the outputs one line nearer to the genlock video input every 5 fields until the unit is

locked. This mode is useful if the instant locking of the crash mode is found to upset any

downstream equipment.

•

Slow

Содержание Mentor RG 360-00-05


























































































































Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы:

Trilogy Communications Mentor RG 360-00-05, Руководство пользователя, Страница: 57 / 121

Результаты поиска

Содержание Mentor RG 360-00-05

Отзывы: