Trillium ROTO-JET VSR 175, Руководство по разборке и сборке

Страница: 50 / 53

VSR 175 47
7.2 ORDERING PARTS
7.2.1. General – It is Roto-Jet Pump’s policy to continually improve its products. Therefore,
specifications are subject to change without notice. Parts should be ordered as far in
advance of their use as possible since circumstances beyond our control may reduce
existing stock.
7.2.2. Placing Orders – The satisfactory ordering and receiving of parts is dependent upon
specific and correct information supplied by the purchaser. A specification sheet for
each unit manufactured is on file at the factory, and in case some special part is
needed, it can be provided if the correct model and serial number is given. Many
unnecessary errors and delays may be eliminated by observing the following
instructions.
Your parts order should state:
1. Model and serial number of pump.
2. Part number, description, and quantity required.
3. Your company name, address and zip code clearly.
4. Specific shipping and billing instructions.
5. Date required.
With this assistance, the time required to expedite your order will be greatly reduced.
NOTE:
Parts will be furnished in original material unless specified as a material change.
All material substitutions should be discussed with the factory.
7.2.3. Assistance – Should you need any assistance, contact the factory or nearest regional
office listed on the back cover.