Trillium ROTO-JET VSR 175, Руководство по разборке и сборке

Страница: 41 / 53

VSR 175 38
the manifold (36) being sure that the two pick-up tube alignment pins (128) are in the
correct position. Remove the center guide and pick-up tube puller.
NOTE (1): Step 3.12.7 and 3.12.11 are best done with the pump in a horizontal position
NOTE (2): Always inspect pick-up tube nut for any damaged threads or scratches, and replace
if necessary. Remember the pick-up tube nut has left-handed threads.
3.11.8. Thread in four ¾” socket head cap screws (32) and torque to 240 ft. lbs.
3.11.9. Lubricate the pick-up tube nut (81) with Molykote G-Rapid Plus on the threads and
under the head (see figure 3.11) and using the pick-up tube nut wrench (P/N 0664836-
01) thread the pick-up tube nut (81) into the pick-up tube (1) and torque to 450 ft. lbs.
Figure 8: Pick-Up Tube Lubrication
3.11.10. For Flanged Pumps Only – Install manifold plug (33) using cap screws (61)
and torque to 54 ft. lbs.
3.11.11. Rotate the driveshaft 360 degrees to make sure that the rotating assembly
moves freely.
3.11.12. The pump can now be returned to service.
Lubricate threads and bottom
of head with Molykote G-
Rapid Plus.