manualshive.com logo in svg

Trillium ROTO-JET VSR 175, Руководство по разборке и сборке

Поделиться
Скачать
Trillium ROTO-JET VSR 175 Скачать руководство пользователя страница 43

 

VSR 175 

40 

4.1.4.  SHUTTER REMOVAL 

4.1.4.1.  Remove the set screw (315) from the hub of the shutter (406) if it was not 

removed earlier.  The shutter is now loose and can be removed from the drive 

shaft (5). 

NOTE:  Do not remove the bearing cap (14) until the drive shaft assembly has 

been removed from the motor. 

4.2 ROTATING COMPONENTS DISASSEMBLY 

The following instructions are applicable to the motor being removed from its foundation and 

placed securely in a 

vertical

 position with the drive end of the motor facing up. 

4.2.1.  ENDPLATE REMOVAL 

4.2.1.1.  Remove the four socket head cap screws (322) from the periphery of the 

endplate (15). 

4.2.1.2.  Using a strap wrench on the fan end of the drive shaft, lock the drive shaft so it 

won’t turn.  Remove the 140mm bearing lock nut (46) using the 140mm torque 

wrench adapter (P/N 0665920).  The lock nut will have to be replaced. 

4.2.1.3.  Thread the cap screws (322) into the three tapped jackscrew holes in the 

endplate (15) until it is released from the motor housing (17).  Remove the 

jackscrews and in their place install three eyebolts (P/N 060055411).  Lift the 

endplate (15) off of the motor housing (17).  Make sure that the drive shaft (5) 

does not come with the endplate (15); they are not attached to each other. 

4.2.1.4.  Thread eyebolts (P/N 06005541) into two of the tapped holes in the drive shaft 

flange (5).  Now the shaft assembly can be lifted out of the motor. 

4.2.2.  SHAFT AND BEARINGS DISASSEMBLY 

4.2.2.1.  Position the pump with the shaft assembly sitting vertical in assembly stand (P/N 

0665944-01) with the fan end down, or horizontal and chocked so it cannot roll. 

4.2.2.2.  The grease distribution ring (304) and spring retainer (66), springs (353), and 

shoulder bolts (144) can be removed by hand as an assembly. 

4.2.2.3.  Using a bearing puller, pull the grease retainer (109), bearing spacer (360), and 

bearing (11) off of the drive shaft (5).  The bearing will have to be replaced. 

4.2.2.4.  If the drive shaft (5) is vertical in the assembly stand, re-position it so the fan end 

is up.  If it is horizontal and chocked so it cannot roll, proceed to 4.2.2.5. 

4.2.2.5.  Remove the bearing lock nut (47) using the 80mm torque wrench adapter (P/N 

0665930). 

Содержание ROTO-JET VSR 175






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды