background image

Visionary - Hardware Installation and Configuration Manual

44

Character/Graphics Generation

32-bit color with alpha channel

True Type font support, ships with (2) resident fonts (serif and sans serif); supports
additional fonts

Linear key to overlay characters and graphics over the video programming

Supports transparency and fades

Static text can be positioned anywhere on the screen; maximum of (48) text objects on
a page

(1) crawl message per page with up to 4000 characters

Text properties include: position, font, size, color, background color, transparency,
speed, and repeats

Images can be positioned on the screen with a maximum of (8) images per page;
transparency supported

Compatible with PNG graphic files, with transparency

All graphic objects (text, boxes, images) can be faded on and off the screen

Message queue handles multiple messages

Command and Control

(1) 10/100/1000 Base-T Ethernet connection on an RJ-45 terminal

(1) RS-232 port on a DB-9 terminal

(4) general purpose inputs, opto-isolated, active low, provided on modular screw
terminals

(4) general purpose outputs, contact-closures, provided on modular screw terminals

Содержание Visionary HD/SD Overlay System





















































Отзывы: