Trilithic Visionary HD/SD Overlay System, Руководство по установке и настройке оборудования

Страница: 28 / 52

Visionary - Hardware Installation and Configuration Manual
26
11. Set the Stream Port to 59902 , unless your network administrator specifies a different
setting for the stream port. The stream port is used to transfer audio of indefinite length,
such as a presidential message (EAN), in near-real time.
12. Click the Program IP Config button. The Visionary will automatically re-boot. After 30
seconds, the Visionary will return to normal operation. Check to ensure that the green
status light on the front of the Visionary is blinking.
Visionary Configuration
After completing the general communication
configuration, the Visionary should be
accessible on the network using its own IP
address, as provided by your company’s
network administrator. On the
Main tab of the
Visionary configuration software, enter the new
IP address in the
Visionary IP Address text
box.
The Visionary configuration software should be
installed on the computer which will ultimately
have long-term control of the Visionary’s
operation. Note that the controlling computer is
not necessarily the same computer as was used
in the initial network configuration procedure.
Should the Visionary configuration software
need to be installed on a different computer than
was used for the initial configuration, refer to
Chapter 4: Installing the Configuration
Software, for the installation procedure.
To set up the Visionary configuration software to communicate with the Visionary at its new IP
address, select the radio button which corresponds to
Ethernet on the Main tab of the
Visionary configuration software. Then, enter the Visionary’s assigned IP address in the
Visionary IP Address text box.