www.trikdis.com
7
September 2021
FLEXi SP3 user manual
Button
Description
1, 2 ...9, 0
Buttons for entering numbers.
C
Button for exiting modes and clearing values.
OK
Button for confirming the specified choice.
ARM
Button for turning on full security mode
ARM
.
SLEEP
Button for turning on
SLEEP
mode.
STAY
Button for turning on
STAY
mode.
OFF
Button for turning on
OFF
(DISARM) mode.
Note:
1.
To turn off programming mode or delete an incorrectly entered value, press the
[C]
button.
2.
If at least one zone is violated, it will not be possible to arm the alarm system (if the
FORCE
property
is not assigned to the violated zones).
5.2
Quick arming/disarming of the alarm system
Arming/disarming the alarm system using a code when the security system has
STAY
zones.
Security modes
ARM
,
STAY
and
SLEEP
are switched to
OFF
/
DISARM
, and
OFF
/
DISARM
is switched to
ARM
or
STAY
mode.
Changing the security mode:
1.
Enter
[User code]
.
a.
If the security system has only one section, then skip step 2. If the system has several partitions, the numbers of the
partitions will appear on the keypad screen, the modes of which the user can change.
2.
Press the numbers of the chosen partitions.
3.
Disarming. Partitions that were in
ARM
,
STAY
and
SLEEP
modes will switch to
OFF
/
DISARM
mode.
a.
When the security system is disarmed, the following text will appear on the keypad display:
Disarmed: Area
.
b.
If the
Bell Squawk
function is enabled, the siren will activate twice for short periods of time as the alarm switches
off.
4.
Arming.
Exit delay
time will be counted down for partitions that were in
OFF
/
DISARM
mode. If a
Delay
zone is violated
during the countdown,
ARM
mode will switch on, and if a
Delay
zone is not violated,
STAY
mode will switch on.
a.
The corresponding text will appear on the keyboard screen:
Armed: Area
or
Stay: Area
.
b.
If the
Bell Squawk
function is enabled, the siren will activate once for a short period of time as the alarm switches
on.
5.3
Arming the alarm in ARM mode
To turn on
ARM
security mode for an security system that is divided into multiple partitions:
1.
Press the keypad button
[ARM]
.
2.
Enter the
[User code]
using the keypad.
3.
Press the buttons with the numbers of the partitions you want to control.
4.
Confirm your selection by pressing the
[OK]
button.
5.
Before the
Exit Delay
time runs out, leave the premises and close the door.
a.
During the
Exit Delay
time countdown, the exit time will be displayed on the keypad screen. When the security
system is armed, the following text appears on the keypad display:
Armed: Area
.
b.
If the
Bell Squawk
function is enabled, the siren will activate once for a short period of time as the alarm switches
on.
5.4
Arming the alarm in STAY mode
To turn on
STAY
security mode for an alarm system that is divided into multiple partitions:
1.
Press the keypad button
[STAY]
.
