WATER LEVEL
PROCESS
PROGRAM
Operation of other full automatic
wash program
Preparation before washing
Completion of washing
!
Upon completion of washing, the buzzer will buzz continuously
for 6 times and then the power will be automatically cut off.
!
Close the water tap.
!
Although the power can be cut off automatically, however, the
as well for the safety.
mains power switch should be turned off
Introduction to other full automatic
washing program
!
"cold " program is used for
washing the normal Clothes.
!
"warm " program is used for
washing the clothing cleanly.
!
"Heavy" program is used for
washing dirtiest or thickest clothing
with the strongest water flow.
!
" speedy " program is used for
washing the clothing not so dirty
and the whole washing process will
be completed in about 30 minutes.
Press the power switch.
Select any one program of
" cold" "warm " " heavy ", or
" speedy " in Program.
Press "Start / pause " button.
The washer will start to work with the set program.
Select the proper water level,
according to the weight of the
clothes.
- Plug in the power cord
- open water tap
- load clothes uniformly
- put in suitable amount of detergent
- close the lid.
