WATER LEVEL
PROCESS
PROGRAM
About washing pr
ogram
Operation of single wash / rinse / spin program
!
User can freely select any
single process, or any
combination of processes
among , "wash", "rinse" and "
spin" according to the actual
requirements.
!
Detail operation methods are
following:
!
single washing -- after switching
on the power, select " wash "
indicator , The operation for
single rinsing and single spin is
similar.
!
Single washing - spin -- after
switching on the power, select
"wash" and "spin" indicator ,The
operation for single rinsing -
spin and single washing -
rinsing is similar.
Preparation before washing
Completion of washing
!
Upon completion of washing, the buzzer will buzz continuously
for 6 times and then the power will be automatically cut off.
!
Close the water tap.
!
Although the power can be cut off automatically, however, the
as well for safety.
mains power switch should be turned off
Press the power switch.
Select the single washing
program required.
Press "Start / pause" button.
Introduction to single
wash program
The washer will start to work with the set
program.
Select the proper water level,
according to the weight of the
clothes.
- Plug in the power cord
- open water tap
- load clothes uniformly
- put in suitable amount of detergent
- close the lid.
