Trident Raider Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 94

Trident Raider Скачать руководство пользователя страница 92

92

Raider Installation and Operation Rev. 1.4.2

Warranty and Service

Limited Warranty

Trident Micro Systems will repair or replace, at our option, any parts found to be defective in either
materials or workmanship for a period of

one year

from the date of purchase. If a defective part

causes a Trident Micro Systems product to operate improperly during the one year warranty period,
we will service it free of charge (original owner only) if shipped and delivered to Trident Micro
Systems at owner's expense. No other warranty, expressed or implied is given. Trident Micro
Systems is not responsible for consequential damages, lightning, failure to read printed instructions,
misuse or abuse, unauthorized modifications, use of our products in applications other than those
intended by Trident Micro Systems, fire, theft, or accidents.

Repair and Return

Obtain a Return Merchandise Authorization (RMA) number by calling our Technical Support
Team at 800-798-7881. All defective or repair products are to be sent with complete details as to
what the problem is

and

have the RMA number printed on the outside of the shipping box.

SEND TO:

Trident Micro Systems
Two Trident Drive
Arden, North Carolina 28704
Attn.: Repair

Out of warranty service charges are determined on an hourly rate plus parts.

THIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO TRIDENT MICRO
SYSTEMS. ITS CONTENTS MAY NOT BE REPRODUCED, IN WHOLE OR IN PART,
WITHOUT EXPRESS WRITTEN PERMISSION FROM TRIDENT MICRO SYSTEMS. THE
INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED. TRIDENT MICRO SYSTEMS DOES NOT ASSUME ANY
LIABILITY FOR DAMAGES. TECHNICAL INFORMATION AND SPECIFICATIONS IN
THIS DOCUMENT ARE SUBJECT TO CHANGE WITHOUT NOTICE.

«
...
90
91
92
93
94
»

Содержание Raider































































































Отзывы:

Нет отзывов