TrickleStar TS2501, Руководство пользователя

Страница: 35 / 113

35
Fan Circulation (Hourly):
In this configuration, you can set the HVAC fan/blower to turn on every hourly.
Note, the fan will also turn on when HVAC system is running (similar to Fan Auto mode). This duration
(of fan running when HVAC is running) counts towards fulfilling the Fan Circulation duration in every
cycle.
For example, if you select the Fan Circulation as “40 mins/hr”, and your HVAC and fan system ran
for 26 minutes in the hourly cycle, the Thermostat will signal the fan to run the remainder 14 minutes
before the end of the hourly cycle.
There are two ways Fan Circulation can be configured, both achieving different purposes:
• Modes: this Fan Circulation setting will be used together with the Modes setting in the Schedule.
When Thermostat is running the Schedule, it will automatically follow the configured set
temperature and fan according to the Modes lined up in the Schedule.
You can configure this setting in the Portal, or the App.
Portal:
1. From the Portal Dashboard, go to Devices tab. Select your device name.
2. Click on Modes tab on the left menu panel.
3. Under Set Fan (Heat) and Set Fan (Cool) fields for each Mode, select your desired Circulation
duration (options: 10, 20, 30, 40 or 50 mins/hr).
Fig 35-A