6
When all the required input modules have been installed you can connect the
input signal cables one by one to the input modules.
Input cable
installation
Basics
Status LED
When you connect the cable to the input connector on the module, remember
to tighten the screws connecting the AV plug to the connector.
HDMI
492030
Status LED
A/V
492080
9
6
There is a status LED on the front of each module. The LED indicates whether
the module has locked on to a frequency or needs to be configured.
Green - flashing
The module has not been configured yet.
Green
No error, MPEG encoding valid.
Red
Module has been configured but no service has been
detected.
No colour
Power has not been switched on.
7
Basics
Log in
When you have loaded the TDX Service Tool from the TDX headend system
to your laptop/computer the Login window of TDX Service Tool is displayed.
When you have pressed the Log in button the System window is displayed.
A/V
492080
When you update the software of a module the status LED provides you with
information about the updating process.
Orange
Boot loader state.
Temporary off
Initiation of the software update.
Temporary green Every time the modules receives a valid data package.
Repeated until the update is completed without errors.
Red
Software update failed.
