14
TDX Service Tool
If you want to remove an HDMI input module and the associated configuration
you can use the Delete button of the module in question in the Input window.
Click the Delete button of the input module you want to remove.
A message window is displayed asking you to confirm that you want to
remove the input module.
Delete setup
When you return to the Input window the configuration of the input module is
displayed in the module list.
Now you can continue to configure the other input modules one by one,
following the procedure described on the previous pages.
Status
information
15
TDX Service Tool
Until you have removed the input module physically from the headend unit
the module list will display a line with the writing in red.
An
important button when you change your configuration of the headend
system is the Apply button placed in the upper right-hand corner of the TDX
Service Tool window.
Apply
Save
configuration
Whenever you have made changes in your configuration,
“Apply” on the Apply button turns red, to tell you that you
have unsaved changes that need to be saved.
Click the Apply button to
save
the changes. When changes
have been saved the “Apply” text loses the red colour.
