TriangleTube Prestige Excellence, Руководство по установке и обслуживанию

Страница: 12 / 44

cH Settings
10
System Pump default: cH1/cH2
System Pump allows the system pump operation to be adjusted for the
application. Press the
UP or doWn buttons to select the desired System
Pump operation then press the oK button to store the setting. The System
Pump options are:
• cH1/cH2/dHW – The system pump will be enabled for any CH1,
CH2, or DHW call. Figure 2, page 11 illustrates a typical existing
system requiring this setting.
Table 3: circulator operation with System Pump = cH1/cH2/dHW
• cH1/cH2 – The system pump will only be enabled for a CH1 or
CH2 central heating call. Figure 3, page 12 illustrates a system
zoned with zone valves requiring this setting.
Table 4: circulator operation with System Pump = cH1/cH2
• cH2 – The system pump will only be enabled for a CH2 central
heating call. The CH(1) pump will only be enabled for a CH1 cen-
tral heating call. Figure 4, page 13 illustrates a system zoned with
zone circulators requiring this setting.
Table 5: circulator operation with System Pump = cH2
note 1: Domestic Hot Water Priority can be disabled which allows the
CH and DHW circulators to operate at the same time.
The circulator operation shown above only applies when Prestige
Model is set to Solo. System Pump only allows the system pump
operation to be adjusted when Prestige Model is set to Excellence.
NOTICE
System Pump
CH1/CH2/DHW
CH1/CH2
CH2
CH1/CH2
CH2 Pump/
System Pump
Auxillary
Boiler Pump
DHW
Pump
CH (1)
Pump
CH 1 Call ON ON
OFF
(Note 1)
ON
CH 2 Call ON ON OFF ON
DHW Call
OFF
(Note 1)
ON ON
OFF
(Note 1)
CH2 Pump/
System Pump
Auxillary
Boiler Pump
DHW
Pump
CH (1)
Pump
CH 1 Call ON ON
OFF
(Note 1)
ON
CH 2 Call ON ON
OFF
(Note 1)
ON
DHW Call ON ON ON
OFF
(Note 1)
CH2 Pump/
System Pump
Auxillary
Boiler Pump
DHW
Pump
CH (1)
Pump
CH 1 Call OFF ON
OFF
(Note 1)
ON
CH 2 Call ON ON
OFF
(Note 1)
OFF
DHW Call
OFF
(Note 1)
ON ON
OFF
(Note 1)