TriangleTube PRESTIGE Excellence 110, Инструкция по установке и обслуживанию

Страница: 8 / 32

• It is prohibited to carry out any modifica-
tions to the appliance without prior writ-
ten consent from Triangle Tube.
• Faulty parts must only be replaced by gen-
uine Triangle Tube factory parts.
• Failure to comply with these instructions
can result in minor property damage, or
injury.
CAUTION
• The homeowner is only permitted to carry out
the basic set-up operations (EZ Setup) after he
has received all relevant instructions from the
installer. Any other set-up must be carried out by
a qualified installer.
• In case of any anomaly, please call your qualified
service technician.
• Make sure to reference the unit’s model number
and serial number from the rating label when
inquiring about service or troubleshooting.
• Triangle Tube reserves the right to change the
technical characteristics, components and
features of its products without prior notice.
Check for an updated version of this manual at
www.triangletube.com.
NOTICE
viii
SAFE
TY
PRODUCT AND SAFETY INFORMATION
Protection must be taken against excessive
temperature and pressure!
TO PROTECT AGAINST EXCESSIVE TEM-
PERATURE AND PRESSURE:
• Verify the Temperature & Pressure (T&P)
relief valve is installed in the location pro-
vided (DHW Side).
• Verify the 30 psi relief valve supplied is in-
stalled in the location provided (CH Side).
• To avoid injury, install the relief valves
in compliance with local code require-
ments.
Failure to comply with these instructions can
result in substantial property damage, seri-
ous injury, or death.
To prevent damage to the inner tank, the In-
staller must:
• Always fill inner tank prior to outer tank
and always drain outer tank prior to inner
tank.
• Relieve primary system pressure below 15
psig prior to draining inner tank.
Failure to comply with these instructions can
result in minor property damage, or injury.
WARNING
CAUTION