Trianco Aztec Gold, Инструкция по установке и эксплуатации

Страница: 4 / 22

4
PREPARATION & SITING
1) Before starting the installation, carefully unpack the
boiler from the carton, ensuring all items are present
and in good condition. The carton should include:
1 x fully-cased boiler
2 x cable strain reliefs
1 x hose connector with manifold fitting
1 x high-limit thermostat for underfloor heating
Notes:
Always store the boiler in a dry place prior to
fitting.
Retain all packaging until installation is complete.
Plastic bags can cause suffocation; please keep
out of reach of children.
2) Work out the desired position of the boiler and, using
the dimensions on Fig. 2 for reference, drill 4 x 6mm
holes in the wall to a depth of 38mm. Insert wall plugs
and fixing screws (not supplied) into the wall.
Notes:
a) If the appliance is to be fitted in a confined space or
compartment with a potential ambient temperature of
60°C or above, it is strongly recommended that
adequate ventilation is provided to prevent the
overheating of the boiler controls. Aeration of 110cm
2
will be required to the compartment, in both high and
low level positions.
b) Ensure that the area surrounding the boiler is kept free
of items which would impede the good ventilation of
the appliance (e.g. towels, linen).
c) When siting the boiler, take into account the need for
future servicing. Enough space should be provided at
the front of the appliance to enable an engineer to
adequately service and/or replace components.
d) The boiler is not to be fitted in a shower compartment
or bathroom, and is not suitable for external installation,
nor in any area subject to adverse temperature
conditions or moisture.
e) The appliance is designed to be fitted in an
upright
position only, with the flow and return connections to
the bottom of the boiler.
f) Ensure adequate clearance is allowed for making the
water connections, as the boiler can be fully serviced
from the front.
FITTING INSTRUCTIONS
The Aztec Gold is a wall-mounted electric central heating boiler designed with smaller locations in mind. The boiler can be fitted
in the smallest of places and requires minimal attention to ensure efficient and reliable operation. The boiler produces hot water
for a fully-sealed system by passing water over electric heating elements which are housed in an insulated stainless steel heat
exchanger.
FIG. 1 - PACK CONTENTS
FIG. 2 - DIMENSIONS & CLEARANCES