Trenz Electronic TE0790, Руководство пользователя, Страница: 19 / 27

TE0790 TRM Revision: v.37
Copyright © 2019 Trenz Electronic GmbH
19 of 27 http://www.trenz-electronic.de
7 Power and Power-On Sequence
7.1 Power supply of the adapter board
The XMOD can be powered via USB or with 3.3V on J2 pins, depending on DIP-switch settings
(see page 16)
. Max.
~100mA for external components are available on J2 3.3V Pin, if the power supply via USB is used.
Following diagram shows how the settings of the DIP-switches S2-3 and S2-4 determines the configuration of the
on-board voltages:
Figure 4: TE0790 on-board voltages configuration
7.2 Power Rails
Power Rail
Name Pin Header
J2 Mini USB B
J4 Direction Notes
3.3V pin 5 - both
possible on-board peripherals' VCC and
core voltages
VIO pin 6 - both
possible Pin header J2 interface signals
and SC CPLD VCCIO
VBUS - pin 1 input USB bus power, nominal
voltage 5 V ± 5%
Table 10: power rails.