TE0790 TRM
Revision: v.37
Copyright © 2019 Trenz Electronic GmbH
11 of 27
http://www.trenz-electronic.de
5 Signals, Interfaces and Pins
5.1 2x6 Pin Header
The 2x6 pin header (2.54mm grid size, female) J2 have to be connected to the corresponding pin header on the
target system. The signal assignment of the pin header on the adapter board depends on the configuration of the
System Controller CPLD firmware.
Basic pin assignment:
Signal
J2 Pin Name
J2 Pin Name
Signal
GND
1*
GND
User Defined
C
A
User Defined
VIO
VDD 3.3V
User Defined
D
B
User Defined
User Defined
F
E
User Defined
User Defined
H
G
User Defined / Button (Reset_n)
Table 3
: Pin header J2 signal assignment. *pin 1 on header J2
