TRENDnet TWG-431BR, Руководство пользователя, Страница: 28 / 93

© Copyright 2019 TRENDnet. All Rights Reserved.
20
TRENDnet User’s Guide
TWG-431BR
4. Click Save at the bottom. Then click Reboot at the top right to commit the changes.
5. Click on Advanced, click on IP Routing Rule Setup , and next to the first entry, and
click Edit .
6. Review the Routing section.
•
Service: Select Enable to enable the route or disable to disable the route.
•
Destination Net/Mask: Enter the IP network address of the destination network
for the route or network to distribute for the RIP/OSPF protocol (e.g.
192.168.150.0/24 )
•
Via
o
Gateway: This option configures that static route to an external IP
network and specify the gateway IP address. If choosing this option,
enter the Gateway IP address. (e.g
192.168.10.2 )
o
Interface: This option configure an interface route. If choosing this
option, click the drop-down list and select the interface.
•
Metric: Enter the metric or priority of the route. The metric range is 1-255 , the
lowest number 1 being the highest priority.
•
RIP – Selecting Enable will distribute the network route to other RIP enabled
devices.
•
OSPF – Selecting Enable will distribute the network route to other OSPF enabled
devices.
You can check the current routing table Advanced > IP Routing Status.
6. Click Save at the bottom. Then click Reboot at the top right to commit the changes.