© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW751DR
26
IPv6 Connection Type – PPPoE
PPPOE Internet Connection Type
PPPoE Session: Select the PPPoE session. To share this connection with IPv4,
click the Share with IPv4 radio button. To create a new connection, click the
Create a new session radio button.
Address Mode: Select the PPPoE IP address is dynamic or static.
IP Address: Enter the static IPv6 address. This field is available when Static IP
is selected.
Username: Enter the IPv6 PPPOE username. This field is available when
Create a new session is selected.
Password: Enter the IPv6 PPPOE password. This field is available when Create
a new session is selected.
Verify Password: Re-type the IPv6 PPPOE password. This field is available
when Create a new session is selected.
Service Name: Enter the service name. This is optional. This field is available
when Create a new session is selected.
Reconnect Mode: Select the reconnect mode as Always on, or Manual.
MTU: Enter the Maximum Transmission Unit (MTU) value.
IPv6 DNS Settings
Obtain IPv6 DNS Servers automatically: Allows the router to automatically
obtain IPv6 DNS server IP addresses.
Use the following IPv6 DNS Servers: Manually enters the IPv6 DNS server IP
addresses.
Primary DNS Server: Enter the primary IPv6 DNS server address. This field is
only available when Use the following IPv6 DNS Servers is selected.
Secondary DNS Server: Enter the secondary IPv6 DNS server address. This
field is only available when Use the following IPv6 DNS Servers is selected.
LAN IPv6 Address Settings
Enable DHCP-PD: Tick the check box to enable the DHCP Prefix Delegation
feature.
LAN IPv6 Address: Enter the LAN IPv6 address.
LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local
address.
Address Auto-configuration Settings
Enable automatic IPv6 address assignment: Tick the check box to enable
automatic IPv6 address assignment.
