TRENDnet TEG-S2620is Скачать руководство пользователя страница 96

Страница: 96 / 124

4. You will see the VLAN displays.

5. If the groups’ list is over one page, you can click

to view other

VLAN groups.

6. Use

Delete

button to delete unwanted VLAN.

7. Use

Edit

button to modify existing VLAN group.

802.1Q VLAN

Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is

possible to create a VLAN across devices from different switch venders. IEEE

802.1Q VLAN uses a technique to insert a “tag” into the Ethernet frames. Tag

contains a VLAN Identifier (VID) that indicates the VLAN numbers.

You can create Tag-based VLAN, and enable or disable GVRP protocol. There

are 256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on

the switch belong to default VLAN, VID is 1. The default VLAN can’t be deleting.

GVRP allows automatic VLAN configuration between the switch and nodes. If the

switch is connected to a device with GVRP enabled, you can send a GVRP

request using the VID of a VLAN defined on the switch; the switch will

automatically add that device to the existing VLAN.

Содержание TEG-S2620is





























































































































Результаты поиска

Содержание TEG-S2620is

Отзывы:

TRENDnet TEG-S2620is, Руководство пользователя, Страница: 96 / 124

Результаты поиска

Содержание TEG-S2620is

Отзывы: