TRENDnet TEG-S2620is, Руководство пользователя, Страница: 37 / 124

6. Select
<Save>
to save the configuration.
NOTE:
If you had configured the trunk groups, you can see it (ex: Trunk 1,
Trunk 2…) in the port list. You also can configure the trunk group as the VLAN
member.
Create VLAN Group: PortBase interface
„
Create 802.1Q VLAN
1.
Enable security VLAN setting:
select to enable or disable security VLAN
group. When you select to enable security VLAN group, only the members in
this VLAN group can access to the switch. The steps of setting security VLAN
refer to the following step 2~ 8. After you have configured the security VLAN
group, you can continue to create other VLAN groups. When you don’t select
to configure security VLAN group, then just create VLAN group refer to
following step 2 ~ 8.
Note:
There is only one security VLAN group.
31