TRENDnet TEG-S2620is, Руководство пользователя, Страница: 88 / 124

Trunking – Aggregator Information interface
State Activity
When you had setup the LACP aggregator, you can configure port state activity.
You can mark or un-mark the port. When you mark the port and click
Apply
button the port state activity will change to
Active
. Opposite is
Passive
.
1.
Active:
The port automatically sends LACP protocol packets.
2.
Passive:
The port does not automatically send LACP protocol packets, and
responds only if it receives LACP protocol packets from the opposite device.
Note:
1. A link having either two active LACP ports or one active port can perform
dynamic LACP trunking.
2. A link has two passive LACP ports will not perform dynamic LACP
trunking because both ports are waiting for and LACP protocol packet
from the opposite device.
3. If you are active LACP’s actor, when you are select trunking port, the
active status will be created automatically.
82