TRENDnet TEG-S2620is, Руководство пользователя, Страница: 86 / 124

Trunking
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between Partner Systems on a link to allow their Link
Aggregation Control instances to reach agreement on the identity of the Link
Aggregation Group to which the link belongs, move the link to that Link
Aggregation Group, and enable its transmission and reception functions in an
orderly manner. Link aggregation lets you group up to eight consecutive ports into
a single dedicated connection. This feature can expand bandwidth to a device on
the network.
LACP operation requires full-duplex mode,
more detail
information refers to IEEE 802.3ad.
Aggregator setting
1.
System Priority:
a value used to identify the active LACP. The switch with
the lowest value has the highest priority and is selected as the active LACP.
2.
Group ID:
There are seven trunk groups to provided configure. Choose the
"
Group ID
" and click
Select
.
3.
LACP:
If enable, the group is LACP static trunk group. If disable, the group is
local static trunk group. All ports support LACP dynamic trunking group. If
connecting to the device that also supports LACP, the LACP dynamic
trunking group will be created automatically.
4.
Work ports:
allow max four ports can be aggregated at the same time. If
LACP static trunk group, the exceed ports are standby and able to aggregate
if work ports fail. If it is local static trunk group, the number must be as same
as the group member ports.
5. Select the ports to join the trunk group. Allow max four ports can be
aggregated at the same time. Click
Add
button to add the port. To
remove unwanted ports, select the port and click
Remove
button.
6. If LACP enable, you can configure LACP Active/Passive status in each ports
80