TRENDnet TEG-S2620is, Руководство пользователя, Страница: 50 / 124

System Configuration
You can configure the STP system parameter after enable the STP function. You
can view spanning tree information about the Root Bridge on the left.
1. Select
<Edit>.
2.
Priority:
assign path priority number.
3.
Max Age:
the maximum path age.
4.
Hello Time:
the time that controls switch sends out the BPDU packet to
check STP current status.
5.
Forward Delay Time:
forward delay time.
6. Select
<Save>
.
STP System Configuration interface
Per Port Setting
1. Select
<Edit>
.
2.
Path Cost:
specifies the path cost of the port that switch uses to determine
which port are the forwarding ports.
3.
Priority:
This is mean port priority; you can make it more or less likely to
become the root port.
44