TRENDnet TEG-S2400I - DATA SHEETS Скачать руководство пользователя страница 40

Страница: 40 / 149

- 40 -

◆

Port VID

Configure port VID settings

From the main Tag-based (IEEE 802.1Q) VLAN page, click Port VID Settings.

Port VID (PVID)

Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful

for accommodating devices that you want to participate in the VLAN but that don’t support tagging.

TEG-S2600i each port allows user to set one PVID, the range is 1~255, default PVID is 1. The PVID

must as same as the VLAN ID that the port belong to VLAN group, or the untagged traffic will be

dropped.

Ingress Filtering

Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the port belongs to that

VLAN. TEG-S2600i has two ingress filtering rule as follows:

Ingress Filtering Rule 1:

A forward only packet with VID matching this port’s configured VID.

Ingress Filtering Rule 2:

Drop Untagged Frame.

Содержание TEG-S2400I - DATA SHEETS






















































































































































Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы:

TRENDnet TEG-S2400I - DATA SHEETS, Руководство пользователя, Страница: 40 / 149

Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы: