TRENDnet TEG-S2400I - DATA SHEETS Скачать руководство пользователя страница 145

Страница: 145 / 149

- 145 -

Step 2. Set up agent/stacking switch mapping port (211.23.53.252:28010->192.168.223.90:80)

Step 3: Set up agent function mapping port (211.23.53.252:28019->192.168.223.90:28019)

Step 4: Modify Master’s “Agent IP” to new IP other than its “Switch IP” (

Important

)

According to the basic rule 2 of “Single IP”, administrator accesses the slaves from Internet

and master’s Switch IP should differ from its Agent IP.

In this case, change Agent IP to 192.168.223.91 to meet the rule, even thought Switch IP and

Agent IP are still within the same IP domain.

Note: If administrator wishes to access the slaves from LAN, please change back the Agent

IP to Switch IP again before launching the Agent/Stacking Manager.

Содержание TEG-S2400I - DATA SHEETS






















































































































































Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы:

TRENDnet TEG-S2400I - DATA SHEETS, Руководство пользователя, Страница: 145 / 149

Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы: