TRENDnet TEG-S2400I - DATA SHEETS Скачать руководство пользователя страница 17

Страница: 17 / 149

- 17 -

2.3. Port Statistics

There are three pages the switch provides for user to monitor the statistics of network traffic:

Port

Summary

RMON Statistics(1)

RMON Statistics(1) Graph, RMON Statistics(2)

The Above information provides a summary of the current switch’s status, including on/off state, link

status, good or bad packets of transmitting and receiving, packets of transmitting abort, packets of

collision and drop packets.

The following two pages provide the statistics of RMON 1,2,3,9 groups. The first part collects the

information about packets of frame size within ranges of 64 , 65-127, 128-255, 256-511, 512-1023, and

1024-1518 bytes, the total received packets and the total receives bytes.

The second part collects the information about drop events, broadcast packets, multicast packets,

alignment errors, undersize packets, oversize packets , fragments, jabbers and collisions.

Press “

Reset

” button to clear all the counter.

Содержание TEG-S2400I - DATA SHEETS






















































































































































Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы:

TRENDnet TEG-S2400I - DATA SHEETS, Руководство пользователя, Страница: 17 / 149

Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы: