TRENDnet TEG-S2400I - DATA SHEETS Скачать руководство пользователя страница 116

Страница: 116 / 149

- 116 -

Actions->

Select

<Edit>

Group:

Display the trunk group ID.

LACP:

Display the trunk group’s LACP status.

LACP Work Port Num:

The max number of ports can be aggregated at the same time. If LACP

static trunk group, the exceed ports is standby and able to aggregate if work ports fail. If local

static trunk group, the number must be the same as group ports.

NOTE:

Before set this page, you have to set trunk group on the page of

Trunk Configuration

first.

4.3.5.2. State Activity

Actions->

Select

<Edit>

Press

Space

key to choose the item.

Active:

The port automatically sends LACP protocol packets.

Passive:

The port does not automatically send LACP protocol packets, and responds only if it

receives LACP protocol packets from the opposite device.

Press

Ctrl+A

go back action menu line.

Select

<Save>

to save configure value.

NOTE:

If user set LACP mode in the trunk group, all of the member ports of this trunk group will set

"Active" automatic.

Содержание TEG-S2400I - DATA SHEETS






















































































































































Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы:

TRENDnet TEG-S2400I - DATA SHEETS, Руководство пользователя, Страница: 116 / 149

Результаты поиска

Содержание TEG-S2400I - DATA SHEETS

Отзывы: