IQ41x Installation Instructions - Configuring TG201251 Issue 5, 22-Aug-2014
11
InstallationInstructions-Configuring
IQ41x
3
Make Connection
(continued)
3
CoNNECt to IQ4
(continued)
Connect Directly to Controller
RD-IQ, SDU-xcite, IQView4 via Local Supervisor Port
(RS232)
Connect via Ethernet Network
Connect the other device (e.g. PC) to same Ethernet network
and ensure an IP connection is available between it and the
IQ4.
Note: To make a connection with SET, a supervisor or display
connect to a vCNC in a Trend device on the same Ethernet
Trend network.
Note: If connecting with IP Tool, the PC should be on the
same Ethernet segment as the IQ4.
Note: To make a connection with a web browser use IQ4’s IP
address or host name.
XW/R/IQ wireless sensor receiver via Local Supervisor Port
(RS232)
Connection use
Notes
IPTool
ü
SET
ü
Requires vCNC
Web Browser
ü
Supervisor
ü
Requires vCNC
Note: Set local supervisor port address to ‘0’ (default) as
communication is limited to the IQ4.
IQView4 requires its own power
supply.
RJ11
RJ11
RD/SDU-
IQ3COMMSCABLE/
RJ11
RJ11
IQView4
RD-IQ
SDU-xcite
RJ11
RJ11
24 Vdc
Supply
XW/R/IQ
Must use external 24 V supply
Standard Ethernet cable
(Cat 5e twisted pair)
max 100 m (109 yds)
RJ45
Hub / Switch
Router
Draft
