69
Press the “MODE” key for
around 2 seconds to confi rm
the settings.
The watch switches
back to barometer
indicator mode.
Reverse bearing
IMPORTANT: To avoid imprecise measuring
results you should not use your watch’s
compass function
near magnetic objects, e.g. mobile phones,
loudspeakers and motors
near metallic objects
near electrical equipment
in reinforced concrete buildings
in a moving object.
If no key is pressed within a minute in
compass mode, the watch switches to the
stand-by mode “IDLE”.
Press any key except “PILOT” and “LIGHT”
to re-activate the compass.
If a distortion is ascertained, the display
“OFF CALL” appears and the directional
indicator fl ashes. The compass must be
re-calibrated (see section 3.10.7, Calibration
of the compass).
TRE_GA_GC350-400.indd 69
22.12.2006 11:59:11 Uhr