79
A
1
2
3
rubber band and push the band into the fastener
until such time as the pin slots fi rmly into the two
holes in the fastener.“
5. Shortening of armband
To shorten the armband, use a sharp object
(paperclip or similar) to press safety pin 3A3 out
of the fastener. Remove the pin completely out of
the rubber band. Shorten the rubber band by cut-
ting it with a pair of scissors. Should the rubber
band be excessively long, shorten it equally at
both ends so that the fastener remains located in
the middle of the armband.
To reconnect the rubber band and the fastener,
press the safety pin back into the last hole in the
TRE_GA_GC350-400.indd 79
22.12.2006 11:59:15 Uhr
