www.traxontechnologies.com
©2015 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
05/15 V1.3
5 of 18
INSTALLATION
2.
Points To Consider
2.1
Plan your installation before mounting the String. The following should be considered for a
successful installation.
Installation distances and appropriate cable lengths. Please consult your local Traxon™
t
office or authorized agent for necessary aid.
The number of 64PXL Board RGBs and appropriate LED Engines.
t
Any DMX512 controllers to be used with the products.
t
On-Site Installation
2.2
ALWAYS keep the cables protected from sharp objects and ensure no
t
damage is generated on the cables.
Failure to keep the product within the operating temperature range of 0°C
t
to 50°C (+32°F to +122°F) and storage temperature range of −20°C to
+70°C (–4°F to +158°F) will void the product’s warranty.
Mounting
2.2.1
To mount the board, first fit the nylon spacers into the mounting holes from the rear of
1.
the board. Then use the screws to firmly fasten the board to a flat surface. Careful not to
over-tighten the screws, see below diagram.
Board Mounting
FIG.3:
125mm/4.92”
SCREW (4x)
MOUNTING SPACER (4x)
Discontinued