www.traxontechnologies.com
©2015 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
05/15 V1.3
11 of 18
Connection between Fixtures
4.2
Use the TX Connect Smart Interconnection Cable to connect between boards. Use the
pre-installed cables to connect between modules. For longer distances, use existing cable
together with a TX Connect Smart Extension Cable.
Connecting Fixtures
FIG.8:
BOARD CONNECTION
LED Positions on Board
FIG.9:
(1,1)
(1,2)
(1,3)
(1,4)
(1,5)
(1,7)
(1,6)
(1,8)
(2,1)
(2,2)
(2,3)
(2,4)
(2,5)
(2,7)
(2,6)
(2,8)
(3,1)
(3,2)
(3,3)
(3,4)
(3,5)
(3,7)
(3,6)
(3,8)
(4,1)
(4,2)
(4,3)
(4,4)
(4,5)
(4,7)
(4,6)
(4,8)
(5,1)
(5,2)
(5,3)
(5,4)
(5,5)
(5,7)
(5,6)
(5,8)
(6,1)
(6,2)
(6,3)
(6,4)
(6,5)
(6,7)
(6,6)
(6,8)
(7,1)
(7,2)
(7,3)
(7,4)
(7,5)
(7,7)
(7,6)
(7,8)
(8,1)
(8,2)
(8,3)
(8,4)
(8,5)
(8,7)
(8,6)
(8,8)
LED Control
4.3
The LEDs on the 64PXL board RGB are controlled by DMX. The LED location on the Board
and its DMX channel is shown in above diagram and in the following table.
LED Dice
R
G
192(n-1) + 24(x-1) + 3(y-1) + 1
192(n-1) + 24(x-1) + 3(y-1) + 2
192(n-1) + 24(x-1) + 3(y-1) + 3
B
Where: n is the Board position in the chain.
x is the LED horizontal position on the Board.
y is the LED vertical position on the Board.
DMX Channel Number
Power On: 64PXL Board RGB has an approximately one second initialization period after
power-on. During this period, the LEDs on the board may light up randomly. This is normal
behavior of the board.
Discontinued
