TravRoute CoPilot 2003 Скачать руководство пользователя страница 8

Страница: 8 / 55

About GPS Technology

The Global Positioning System (GPS) is a tracking and navigation system developed by the

U.S. Department of Defense. The system uses 24 satellites that orbit the earth, sending out

radio waves that can be picked up by GPS sensors (hardware devices for receiving data).

Normally, a GPS sensor relies on receiving signals from four satellites simultaneously to

track its position. Each signal contains an identifier for the satellite that emitted it and the

exact time it was emitted (to the nanosecond). GPS relies on the fact that radio waves travel

at the speed of light to calculate distances and the exact location of the sensor is figured by

combining the data received from three or four satellites.

Given the right conditions, a GPS sensor can identify your geographic position anywhere in

the world. GPS is able to give you the latitude, longitude and elevation of your present

location, as well as your road speed and direction of travel on a route.

GPS Accuracy

The GPS signal CoPilot receives from the constellation of satellites has a rated accuracy of

10 meters. This means that 95% of the time the reported location is within 10 meters (30

feet) of your exact position. CoPilot takes this location information and enhances it further

by "snapping" it to our street and highway network. Occasionally, CoPilot will place you on

the wrong road. If this occurs, keep driving and CoPilot will automatically correct itself and

find your proper position.

At times, CoPilot's GPS tracking will be less accurate or fail to work at all because the unit

is unable to receive satellite signals. However, the unit is resilient; eventually, it finds itself.

Its ability to report your location is directly proportional to its ability to receive accurate

line-of-sight satellite signals.

Heavy foliage, buildings, tunnels, or any other structures

- 3 -

WARNING:

CoPilot navigation instructions are only computer-generated advisories

and may contain errors. Obey all traffic regulations even if they are

completely contradictory to the navigation suggestions.

Keep your eyes

on the road and hands on the wheel!

Do not attempt to look at the

screen if you are the driver. TravRoute

assumes no responsibility for

any damage or injury resulting from the use of this product.

Содержание CoPilot 2003
























































Результаты поиска

Содержание CoPilot 2003

Отзывы:

Похожие инструкции для CoPilot 2003

Бренды по названию

Популярные бренды

TravRoute CoPilot 2003, Руководство пользователя

Результаты поиска

Содержание CoPilot 2003

Отзывы:

Похожие инструкции для CoPilot 2003

Бренды по названию

Популярные бренды