TravRoute CoPilot 2003 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 55

background image

- 12 -

Guidance Mode

Start Navigating

If your GPS receiver is attached you're ready to start driving! The CoPilot navigation

system will guide you to the destination(s) you enter and recalculate your route should you

miss a turn.

Because CoPilot needs to know where you're going in order to give you navigation advice,

you must enter a destination. (You do not need to enter an origin. If your GPS receiver is

picking up signals, CoPilot will automatically fill in the start place.) In Guidance Mode, the

Passenger screen will open and a highlighted route will appear on the map that starts at your

current position, and ends at your next stop. Your route will also be tracked on the map

while you drive.

NOTE

: If

Driver

is set in the control panel, the Driver Safety screen will

appear at more than 10 m.p.h., but CoPilot voice technology will remain active and you'll

receive simple turn instructions on the screen.

If you deviate far enough from your pre-planned route (you might make a wrong turn or

choose to follow your own variation of the route), CoPilots Dynamic Directions will

automatically recalculate a new path to your destination from your current position.

Navigating With Dynamic Directions

1.

Enter a destination, with or without a street address. You may enter intermediate

stops before entering a destination if you like -- CoPilot will route you to each

stop, beginning with the stop that was entered last. In the Passenger screen, the

control panel will be visible to the right of the map. You'll see your highlighted

route drawn on the map from your current position to the destination you entered.

2.

Start driving!

As your GPS unit receives signals, arrows will appear on the map

beginning at your start place and track you as you drive. CoPilot will automatically

prompt you and tell you when your next turn is coming up. If you go off route,

CoPilot's Dynamic Directions will reroute you to the next stop from your

current position.

CoPilot also incorporates

Side-of-Street Address Detail

to let you know what side of the

street your destination is on. Also, while driving on major highways, CoPilot will give you

a

Lane Change Warning

if your next turn is a left exit off the highway.

«
...
15
16
17
18
19
...
»

Содержание CoPilot 2003
























































Отзывы:

Нет отзывов

Похожие инструкции для CoPilot 2003

Бренд: Eagle Страницы: 36

Бренд: V-Sun Страницы: 19

Бренд: Globalsat Страницы: 18

Бренд: S&T Страницы: 37

Бренд: F-Tech Страницы: 10

Бренд: Queclink Страницы: 21

BMW Motorrad Navigator III

Бренд: Garmin Страницы: 50

Бренд: Yada Страницы: 16

Бренд: Seiko Страницы: 58

iLocate GPS AutoTracker AT850218

Бренд: Integrated M2M Technologies Страницы: 6

Бренд: Carmanah Страницы: 51

Бренд: Digifly Страницы: 46

Бренд: NorthStar Страницы: 68

Бренд: TAGG Страницы: 16

Бренд: GPS ANYPLACE Страницы: 14

Бренд: Accurate Technology Страницы: 14

Бренд: Koden Страницы: 8

Бренд: Garmin Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды