6 Stove
Installation
(for qualified installers only)
© Travis Industries
100-01259
4150520
Installation Options
Masonry Fireplace Insert
Zero-Clearance (Metal) Fireplace Insert
Features
2.2 Cubic Foot Firebox Volume
Single Operating Control
Accepts Logs Up to 24" Long
Steel Plate Construction (Up to 5/16")
Heavy Duty Refractory Firebrick
Standard High-Tech Blower
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)*
1,200 to 2,000
Maximum Burn Time
Up to 10 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
This model was not tested for efficiency however it is assigned a default efficiency of 63% by the EPA
under previous subpart AAA. Efficiency of this wood heater will be affected by the operational burn rate
and the moisture content of the wood used as fuel.
Dimensions
6-3/8"
(162mm)
450 Lbs. (200 Kg)
6" (153mm) Dia.
19"
(483mm)
21-1/2"
(547mm)
a
b
28-7/8" (734mm)
19-3/4"
(502mm)
18-7/8"
(480mm)
10"
(254mm)
Figure 1
(a) Measure clearances from base of insert
(b) Fireplace Opening
Emissions
This heater meets the 2015 U.S. EPA’s crib wood emission limits for wood heaters sold after May 15,
2015. Tested to Method 28, 5G1 this heater has been shown to deliver heat at rates ranging from 12,100
to 29,600 BTU/hr and an emission value of 4.4g/h.
