12
Fireplace Insert Installation
(for qualified installers only)
© Travis Industries
100-01259
4150520
Surround Panel Installation
Width
Height
Part#
Standard Size
42"
30-1/2"
96100212
1. Before installing, the insert should be in place with the flue attached. Attach the brackets as
shown below, using the screws included in the hardware pack with the insert. Make sure the
brackets are flush with the front of the convection chamber.
2.
Attach
the
surround
panel
as
shown
below.
HINT
:
When installing the panel, route the wires through the notch on the bottom of
the panel (either side).
Face Installation
There are several face options available for this fireplace insert. Refer to the instructions included with
your face.
