28
Maintaining Your Appliance
© Travis Industries
100-01259
4150520
Door Parts
4
3
2
1
5
6
8
7
ID #
Description
Qty
Part #
ID #
Description
Qty
Part #
1
Gasket Cement, 4 oz
1
99900427
2
Door Gasket, 3/8” x 70”
1
99900429
3
(4) Clips w Screws, Gaskets - Rect
(4) Clips w Screws, Gaskets - Arched
1
1
250-02191
250-02193
4
(2) Clip Gaskets
1 250-02194
5
Glass (w Gasket) – Rectangle
Glass (w Gasket) - Arched
1
1
250-02183
250-02195
6
Glass Gasket (1/4” X 65”)
1
250-02184
7 Handle
Assembly
1 250-02196
8
Wood Handle w Screw
1
250-01305
Replacing the Glass
The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips.
Lay the glass gasket in the door frame (cut off excess gasket). Place the glass on the gasket. Secure
the glass clips to hold the glass in place (make sure the glass clip gaskets are in place).
Replacing the Door Gasket
The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.
Blower and Electrical Parts
6
4
3
5
2
1
7
ID #
Description
Qty
Part #
ID #
Description
Qty
Part #
1 Left
Blower
1 228-10069
2 Right
Blower
1
228-10070
3
(4) Blower Grommets w Spacers
1
250-00369
4 Rheostat
1
250-00302
5
Rhoestat Knob w Nut
1
250-00869
6 Power
Cord
1
250-00316
7 Thermodisk
1 228-30050